⭕️Delivery: Shipping for you in 24 hours from Metro Manila

✅Transportation time: 3-4 days in Metro Manila,

✅It is usually 5-7 days after leaving Mani

✅Except for remote areas

Product name: Water Dispenser

Model:JD-6104

Rated voltage:220V

Rated power:490W

Net weight:4.2Kg

Gross weight:5.0Kg

Package dimensions: 300*300*860mn

Hot water temperature: 85-95C

✅FUNCTION AND FEATURES:

*The drinker adopts advanced electronic heating methods and installs a fully automatic temperature controller. It is with light weight, no pollution, low noise, fine-safe function, quick heating, high heat efficiency, and low power consumption.

*The drinker can supply cool water and hot boiled water for making tea, coffee, and instant noodel. Itis suitable for families, offices, ect.

*The electric elements and powerline in the drinker meet the StateCCEE Safety Authorization.

*The appearance of the drinker uses full plastic construction and is newin design.

Easier to change water because it provides leakage-protection plasticbottle lid.

✅USING METHODS:

*After disassembling the outer package, put the drinker on the table or tea table.

*Put the clean waterbottle with clever cap down to the clever stand.

*Open the heat water tab; it will emerge air bubbles in the bottle. it means the water is flowing into the hot water bucket, Push down the hot water valve continuously until the water flows out. Switch on the heating switch; the red heating indicator lamp lights on at that time.

When the red lamp automatically goes out, it means the temperature of the water in the hot water bucket has reached about 95°C. When the temperature drops to about 85C, the red lamp automatically lights on, which means heating starts again, the temperature can. Be sure between 85℃-95℃ finally.

✅WASHING METHODS:

*Before washing, you must switch off the power at first.

*The washing period should be once in a month to ensure water quality

*When washing is normal: first take away the bottle; then take away the clever stand (turn in counter clockwise, then take upward) and wash in clean water; then wipe the water storage bucket with a clean wet cloth. When wiping, don’t let oddments or sewage go into the drinker.

*Strictly forbid to pour shell with water or wipe and wash drinker body with gas, organic solvent.

*Never use detergent or chemicals harmful to health to clean the watertank.

*Do not directly spray water on the surface of the product. Wipe the front and back of the product with a water-soaked soft cloth.

✅POINTS FOR ATTENTION:

*The drinker must fill water at first. then switch on. Strictly forbid to switch on and heat when the drinker is without water to avoid burning and breaking the heater.

*The back of the drinker mustn’t be close to the wall and should be 15 cm away from the wall in a normal way. *The machine must keep away from the high temperature and avoid long-term sunlight.

*Don’t let the children press the hot water tap to avoid scald.

*The drinder must use the three-fuse socket with an electric protective switch and ground wire independent.

-33%